Over the last few years, SSDs have come down in price. This is primarily because of their increased capacity and decreased cost per gigabyte. But there are other factors to consider when Buying SSD for your Ryzen build.

If you’re confused from where to start with these questions, here’s a guide on how to answer them and get the best bang for your buck!

Things to consider for buying SSD for ryzen build


What is your budget For Buying SSD ?

This question may seem obvious, but it can be a little tricky to answer. If you’re on a budget and only want an SSD to load games and programs quickly, you don’t need to get the top-of-the-line model But if you plan to use your SSD for things like playing videos and editing content.


What’s your average workload?

If you’re only using the disk for playing games, your main priorities will be speed and price. You’ll want to Buying SSD with faster read/write speeds, which will allow you to load games faster. If you’re using the disk for multitasking or heavy workloads, then you’ll need to prioritize reliability.

This is because an SSD used heavily over time will decrease performance.


What brand/model of the disk are you using?

This mainly pertains to reliability, but some other factors come into play here. The most crucial factor is cost vs quality. Some brands are known for being more reliable than others, which will increase their price. At the same time, sometimes manufacturers use the same components in the drive but just attach their branding to it.

This can be a little tricky because there are times where you

have an SSD that’s known for being unreliable pass through several different Hands until it makes its way to you.


What capacity should you get?

This one is pretty straight as long as you remember that more space = more money. You’ll want to purchase an SSD with the capacity you need while keeping in mind you’ll have to spend a little extra for anything over 256GB.

The good news is that prices have been dropping recently, so it’s not impossible to find some drives with 1TB of space for around $200 or more, which is the same price as some 500GB drives from just a few years ago.

The reason why price drops are happening is because of demand. Consumers demand higher capacity drives, but there’s only so many NAND cells you can fit within an industry before it becomes too complex (and thus expensive) to manufacture.


How much throughput speed do you need?

SSD speed is one of the most important aspects of choosing an

SSD. You’ll want to prioritize this above anything else if you’re looking for

high performance.

Two main factors come into play when it comes to throughput: read/write speeds and IOPS. The higher the IOPS (Input/Output Operations Per Second) the more data can be transferred at any given time.

Here’s a quick example to demonstrate what higher IOPS can do.

Here’s Windows boot time with an HDD vs SSD:

HDD (1 TB Western Digital Black) = 55 seconds

SSD (120 GB Kingston SATA III) = 16 seconds

If you’re looking for more throughput speed, the big three are Samsung, Crucial/Micron (essentially the same thing), and Intel. You can find out more about these drives in an article I wrote on choosing an SSD.


How much capacity do you need?

This one is pretty straightforward, but it would be best if you considered it before Buying SSD.

Since there are several different types of SSDs ( SATA, mSATA,

and M.2 ) The amount of space they can hold will vary: 1TB = 1000GB or ,000,000MB and that number will be lower for smaller SSDs.

For example, if you have a PC that currently only has an HDD, it’s likely less than 1TB.

you’ll probably have to purchase a drive with at least 120GB of space to hold your OS and some games since even though they are small files, you’ll need enough space for them.


What about M.2 vs SATA?

You might have noticed that some newer motherboards are  equipped with M.2 ports instead of the more common SATA ports. If you’re not too sure what this means, don’t worry–you’re not alone. M.2 is basically a newer type of connection used for SSDs, and it has some distinct advantages over SATA.

The most significant advantage to M.2 is its speed, which can reach

read/write speeds of nearly 3GB/s, whereas SATA maxes out at roughly 550MB/s (which is still very fast). SATA was designed to be used in regular hard drives since they have spinning metal platters, which are much slower than flash memory.

However, these higher read/write speeds can only be achieved when using an M.2 drive in a motherboard with an M.2 port that supports SSDs running in ACHI mode (Advanced Host Controller Interface). Most M.2 SSDs come with an ACHI controller, but just in case you’re not sure whether or not yours does, you can check this list at PC Part Picker .

Another important note is that if you purchase a drive with less than 256GB of space and want to use it in a computer with an M.2 port, you will have to reformat it so it’s running in ACHI mode first.

If you want to save money, then SATA is absolutely fine and there’s no need to purchase an M.2 drive unless you really feel like doing so.


The best SSD

Best are the best SSD for ryzen 5 3600x and other ryzen models. Hceck out the list. 

1. Kingston V300 120GB SATA III SSD

Kingston’s SSDs are reliable, and this one is no exception. It

has a respectable read/write speed of 450MB/s along with decent IOPS (I’m still not sure what that means).

If you’re looking for an inexpensive entry-level SSD that will

work great for multitasking and daily use, then this is the one to get.


2. Samsung 850 EVO 250GB SSD

Samsung’s EVO series of drives are fast and reliable, which also comes with a 5-year warranty (in case anything goes wrong). This drive has better read/write speeds than most SATA III drives (which is important if you plan on transferring large files between it and another device frequently) and a respectable IOPS of nearly 90,000.

The 850 EVO is known for its ability to hold up well over time without degrading much, which is great if you install a lot of games or use your computer frequently. It also comes with Samsung’s Magician software which is very easy to use if you want to set up a caching drive or make some other changes.


3. Crucial MX300 275GB SATA III SSD

Crucial’s MX series of drives are easily one of the best optionsfor entry-level gamers looking to upgrade their computer’s storage. This particular model is fast, has decent IOPS (100k), and comes with a generous 3-year warranty.

Its read/write speeds are nothing to write home about compared

to Samsung’s EVO series, but it can easily perform just as well as most SATA III SSDs. It also works great with gaming consoles–my PS4 boots. PNY CS1311 480 GB SATA III SSD

If you’ve never bought an SSD before, then this one might be a better option because it offers some of the best read/write speeds for the money. Its write speed is awe-inspiring, coming in at an average of 450MB/s.

This drive also has decent IOPS and comes with a 3-year warranty which is always nice. It’s not an M.2 drive, but if you’re looking forsomething that will be reliable and won’t cost too much, this is a great option to consider.


4. Intel 545s 256GB M.2 SSD 

This M.2 drive has slightly better read/write speeds than Samsung’s EVO series, plus it comes with a 5-year warranty. It also uses significantly less power which is great if you’re trying to save some energy usage on your computer’s PSU (power supply).



As you can see, Buying SSD are crucial if you want your computer to boot up quickly and perform well when multitasking. Even with a regular hard drive, an upgrade from 5400RPM storage to 7200RPM will help.

This doesn’t mean that every computer needs an SSD since they do cost more than regular hard drives, but if you have the money to spend, then an SSD is well worth it.

Also Read: Top Random Things That You Should Buy from Walmart!